Case Studies

Presence of Mercury Indicates Potentially Counterfeit Version of Medication

A client recently approached RJ Lee Group with a suspected counterfeit version of their patented injectable medication. Unlike the cloudy solution the company produces, the two samples provided were more translucent, almost clear. The client was concerned that the samples were either a counterfeit or contaminated version of their product, and asked our laboratory to ...
Read More ...

Test Chamber Simulation Studies Confirm Respirator Effectiveness for Airborne Coal Dust

A number of personal injury claims asserted that NIOSH-approved respirators worn by coal miners were tested using silica dust and therefore were not effective for miners exposed to airborne coal dust. The NIOSH method evaluated the performance of air-purifying respirators according to Title 30, Part 11 of the Code of Federal Regulations. A law firm ...
Read More ...

Are There Health Implications from Exposure to Engineered Nanoparticles Emitted from Laser Printers?

The following case study explores engineered nanoparticles released during laser printing.
CHALLENGE: Characterize the engineered nanomaterials (ENMs) in toner formulations and study the release of the ENMs during consumer use of laser printers. Characterize their physiochemical, morphological, and toxicological properties.
SOURCE: Printers from the four most commercially available manufacturers and models using a variety ...
Read More ...

Do Engineered Nanoparticles Emitted from Laser Printers have Health Implications?

CHALLENGE: Characterize the engineered nanomaterials (ENMs) in toner formulations and study the release of the ENMs during consumer use of laser printers. Characterize their physiochemical, morphological, and toxicological properties.
SOURCE: Printers from the four most commercially available manufacturers and models using a variety of printer toner powder and paper were used during printing.
PROCESS: The ...
Read More ...

Micro/Nano-Scale Investigation Addresses Polystyrene Manufacturing Challenges


Challenge: A manufacturer was experiencing production issues associated with polystyrene vessels in a life science application. Our challenge was to investigate the problem, which was impacting multiple product lines, to determine the root cause of failure and provide a means of resolution.
Material: Polystyrene is critical to biomedical research and science. Its optical clarity ...
Read More ...

Raw Material Specification Changes Resolve Problem with Cured Silicone

Silicone elastomers, foams, coatings, and adhesives are widely used in virtually all aspects of manufacturing, in construction, the automotive industry, and medical and personal care products. The properties that contribute to making silicones indispensable in many applications, such as their ability to repel water, their excellent heat stability and chemical resistance, are also responsible for ...
Read More ...

PVC Pipe Failure Results from Improper Installation

Polyvinylchloride (PVC) is one of the most widely produced plastics in the world and accounts for approximately 70% of new buried water distribution and sanitary sewer pipes being installed in the U.S. and Canada today. With so much more PVC in use today, there are more situations in which pipes can fail. Whether caused by ...
Read More ...

Multi-Faceted Support for International Liquefied Natural Gas Production

RJ Lee Group provides significant technical support to Fortune 500 companies for international liquefied natural gas production, including those involved in energy production. Technical challenges that are already significant become magnified when working across continents, cultures, and environments – e.g., the middle east is particularly harsh from a corrosion standpoint.
In this example, RJ Lee ...
Read More ...

Failure Analysis Determines Faulty Workmanship to be Cause of Defective Building Materials

RJ Lee Group's petrographic scientists used in-house laboratory capabilities to prove that poor workmanship—rather than faulty materials—was the cause of delamination and cracking in stucco used in a residential construction project.
Read More ...

Enterprise-Wide Data Integration Solution

Customized web interface provides decision makers ability to assess weapons readiness.
Read More ...

Collected Intelligence Promotes Safety and Readiness

Customized web interface provides decision makers ability to assess weapons readiness.
Read More ...

Extending the Safe, Healthy Life of Jet Engines While Improving the Readiness and Availability of the Fleet

Software tools support decisions that extend the safety and health of jet engines.
Read More ...

Capacitor Testing Provides Data for Possible Patent Infringement

RJ Lee Group received several de-mounted multi-layer ceramic SMT capacitors for examination. The devices were involved in a patent infringement case dealing with device design and the electrical properties of the insulator material.
Read More ...

Outsourced Component Did Not Contribute to Medical Device Implant Failure

When the manufacturer of a medical device implant saw an increase in the device’s failure rate after implant, they alleged that a component provided by a supplier was responsible.
Read More ...

Did a Cracked Pipe Cause a Landslide?

RJ Lee Group was retained to investigate the role that a failed municipal water pipe played in a landslide that resulted in environmental concerns. After performing a comprehensive investigation, our experts determined that the pipe failed as a result of the landslide rather than the pipe failure causing the landslide.
Read More ...

Delamination Problem Requires Multi-Layered Approach

RJ Lee Group investigated the cause of the delamination of acoustic fireproofing attached to steel beams in public facilities. After thoroughly investigating samples from many locations, we identified the material issues and recommended remediation solutions as well as modifications to future product applications.
Read More ...

Concrete Failure Analysis Reveals Multiple Causes

Using a combination of visual observation and petrographic analyses, RJ Lee Group determined the root cause of concrete failure in a swimming pool with recurring leaking and cracks—contractor deviation from the pool design.
Read More ...

Product Failure Analysis: Consumer Product Affected by Inappropriate Raw Material

When homeowners issued complaints about staining on roofing shingles, the manufacturer took action. Through a full-scale forensic investigation, RJ Lee Group determined the source of failure and maintained the client's reputation.
Read More ...

Establishing the WTC Dust Signature: Managing Post 9/11 Environmental and Damage Assessments

RJ Lee Group served as the lead scientific management team, collecting and processing more than 100,000 samples over a three-year period — the most comprehensive environmental impact study ever performed in Class-A building structures.
Read More ...

Exemplar Comparison Eliminates Aircraft Engine as Cause of Fatal Accident

In an effort to determine if mechanical failure may have contributed to the cause of a fatal airplane crash, an airplane engine manufacturer retained RJ Lee Group to examine components of the 30-year old engine involved in the accident.
Read More ...

Industrial Plants Can Face Costly Nuisance Dust Claims

RJ Lee Group was retained by an industrial plant to investigate — and ultimately refute — nuisance dust claims. We issued an expert report and provided supporting data and a deposition testimony.
Read More ...

Experts Distinguish Corrosive Property Damage from Normal Deterioration

When 60 tons of chlorine gas were released in a catastrophic event, RJ Lee Group was called in to assess more than 360 property locations and 500 vehicles. Our expert testimony ultimately helped to refute unsubstantiated damage claims in the surrounding area.
Read More ...

Award-Winning ASCAT Technology Provides Accurate, Rapid and Detailed Inclusion Data to Improve Productivity and Product Quality in the Steel Industry

RJ Lee Group developed the ASCAT with a 1999 grant from the Department of Energy, and commercialized it in 2007. Now, instead of taking a week to complete analysis manually, the tool automatically analyzes several hundred inclusions in less than an hour.
Read More ...

Improving Laboratory Productivity at the World’s Largest Nuclear Waste Site

In 2009, RJ Lee Group was subcontracted to provide support services for the largest nuclear waste site in the world. In less than a year, we improved the on-time delivery rate by 40% and reduced testing turnaround time from 30 to 10 days.
Read More ...

Personal Care Products Manufacturer Needs Analytical Method with Sufficient Level of Detail

RJ Lee Group develops analytical methods to ensure personal care products complies with quality standards.
Read More ...

Maintaining FDA Approval: Substitute Material

RJ Lee Group helped a client demonstrate that a change in source materials would not affect patient safety or product performance. Ongoing FDA approval was granted without the need for costly re-resting and re-submission.
Read More ...

Manufacturer of Fire Resistive Materials Needs Materials Performance Answers

When a manufacturer uses materials from different sources, it can impact final product consistency. By evaluating a client's raw materials for deviations and variation, RJ Lee Group helped increase supply sources and reduce material costs.
Read More ...

A Test Chamber Designed to Measure Respirable Dust for Product Stewardship

RJ Lee Group designed and constructed a test chamber to simulate a controlled environment in which we could sample for respirable dust.
Read More ...

Uncovering an Art Treasure’s Hidden Secret

An art collector, who owned a painting purchased by a family member from an art gallery in Europe just before the German invasion of Paris, contacted RJ Lee Group to determine when the painting had been created. The painting was signed by a well-known early 20th century artist and was true to the artist’s style, but it was not listed in the artist’s portfolio of known works. The owner wanted to determine if the painting could be the work of this artist based on its age. Our mission was to establish a timeframe in which the painting could have been created by investigating the pigments and other materials used and examining the construction of the painting.
Read More ...

Nanotechnology- RJ Lee Group Designs and Conducts a Multiphase Study

Nanotechnology- RJ Lee Group designs and conducts a multiphase study to help identify and manage potential health and safety hazards as well as environmental impacts related to unbound engineered nanoparticles (UNP).
Read More ...

Failure Analysis Investigation Points to QC Solution to Maintain Profits and Customers

Shatter-prone glass syringes pose any number of risks — to patients and health care workers — and costly, potentially dangerous waste. One well-known medical device manufacturer wanted reliable data on why syringes from an overseas manufacturer would shatter upon loading.
Read More ...

Improving the Recovery Process by Defining Simulant Composition for Hazardous Waste

RJ Lee Group designs a program that determines the compositional mix of waste byproducts of our national defense plutonium in order for it to be turned into a more stable, usable glass form.
Read More ...

Analyses Reveal Viaduct Concrete Failure Not Consistent

RJ Lee Group was retained to provide information on the current state of the concrete, failure analysis, and an estimation of service life for a viaduct on a main north-south highway that handled approximately 75,000 vehicles a day.
Read More ...